Perfectha 2026: The complete guide for specialists
Perfectha from Sinclair Pharma is a high-quality hyaluronic acid filler range that is unique E-Brid technology distinguishes. With four product variants (FineLines, Derm, Deep, Subskin), Perfectha covers the entire spectrum from fine lines to deep volume creation.
What is Perfectha? The E-Brid technology
Perfectha uses the E-Brid (Enhanced Bridging) technology, a patented crosslinking method that ensures an optimal balance between viscosity and elasticity.
Advantages of E-Brid technology:
- Optimal networking: Uniform particle size for homogeneous distribution
- High elasticity: Natural movement and facial expressions are retained
- Low tendency to swelling: Minimal water absorption
- Long shelf life: Stable networking for 9-18 months
- Biocompatibility: Non-animal hyaluronic acid (NASHA)
- Reversibility: Dissolvable with hyaluronidase
The Perfectha product family
1. Perfectha FineLines – For the finest lines
Product features:
- HA concentration: 18 mg/ml
- Viscosity: Very low
- Injection Depth: Superficial (upper dermis)
- Shelf life: 6-9 months
- Available: With lidocaine and without lidocaine
Main indications:
- Fine perioral lines (smoker's wrinkles)
- Crow's feet (lateral eye wrinkles)
- Fine forehead wrinkles
- Superficial glabellar wrinkles
- Fine neck folds
Special feature: FineLines is the finest product in the range and has been specially developed for very superficial injections.
2. Perfectha Derm – For moderate wrinkles
Product features:
- HA concentration: 20 mg/ml
- Viscosity: Medium
- Injection depth: Middle dermis
- Shelf life: 9-12 months
- Available: With lidocaine and without lidocaine
Main indications:
- Nasolabial folds (mild to moderate)
- Marionette wrinkles
- Lip contouring
- Moderate forehead wrinkles
- Glabellar wrinkles
- Mentolabial fold
Special feature: Derm is the most versatile all-rounder in the Perfectha range for most aesthetic indications.
3. Perfectha Deep – For deep wrinkles
Product features:
- HA concentration: 20 mg/ml
- Viscosity: High
- Injection depth: Deep dermis
- Shelf life: 12-15 months
- Available: With lidocaine and without lidocaine
Main indications:
- Deep nasolabial folds
- Pronounced marionette wrinkles
- Lip volume (moderate augmentation)
- Deep glabellar wrinkles
- Cheek contouring (light)
- Chin crease
Special feature: Deep offers higher lifting capacity and is suitable for deeper wrinkles and moderate volume building.
4. Perfectha Subskin – For volume building
Product features:
- HA concentration: 25 mg/ml
- Viscosity: Very high
- Injection depth: Subcutaneous to supraperiosteal
- Shelf life: 12-18 months
- Available: With lidocaine 3 x 1 ml and without lidocaine 3 x 1 ml
Main indications:
- Cheek structure and midface volume
- Chin augmentation
- Jaw contouring (Jawline)
- Temple region (Temporal Hollowing)
- Back of hand volumization
- Pre-jowl sulcus
Special feature: Subskin is the highest volume structural building and contouring product.
Product comparison: Which Perfectha for which application?
| product | HA concentration | Main application | Injection depth | Durability |
|---|---|---|---|---|
| FineLines | 18 mg/ml | Fine lines, superficial | Superficial | 6-9 months |
| Derm | 20 mg/ml | Moderate wrinkles, lip contour | Mid-dermal | 9-12 months |
| Deep | 20 mg/ml | Deep wrinkles, lip volume | Deep-dermal | 12-15 months |
| Subskin | 25 mg/ml | Volume building, contouring | Subcutaneous/supraperiosteal | 12-18 months |
Perfectha vs. competition
Perfectha vs. Juvederm:
| feature | Perfectha | Juvederm |
|---|---|---|
| Technology | E-Brid | Vycross |
| Durability | 6-18 months | 9-24 months |
| Price | Middle class | Premium |
| Elasticity | Very high | High |
| Best application | Natural results, value for money | Longevity, premium segment |
Perfectha vs Restylane:
| feature | Perfectha | Restylane |
|---|---|---|
| Technology | E-Brid | NASHA |
| Elasticity | Very high | Moderate-High |
| Tendency to swell | Low | Moderate |
| Price | Middle class | Premium |
Injection techniques for Perfectha
General principles:
- Slow injection: Max. 0.1 ml per second
- Aspiration: Perform before each injection
- Massage: Gentle after injection for even distribution
- Layer by layer: Multiple thin layers instead of one thick one
Product-specific techniques:
Perfectha FineLines:
- Technique: Serial Puncture or Linear Threading
- Needle: 30G or 32G
- Angle: 10-15° to the skin surface
- Tip: Very superficial, slightly tense the skin
Perfectha Derm:
- Technique: Linear Threading, Fanning or Serial Puncture
- Needle: 27G-30G or blunt cannula 25G
- Angle: 30-45° to the skin surface
- Tip: Versatile, good for beginners
Perfectha Deep:
- Technology: Linear Threading, Depot or Fanning
- Needle: 27G or blunt cannula 23G-25G
- Angle: 45° to the skin surface
- Tip: Inject deeper for optimal lifting
Perfectha Subskin:
- Technique: bolus, depot or blunt cannula
- Needle: 25G-27G or blunt cannula 22G-23G
- Angle: Vertical or 45° depending on the area
- Tip: Supraperiosteal for structural construction
Treatment protocol
Before treatment:
- Medical history: allergies, previous treatments, medication
- Photo documentation from multiple perspectives
- Information about risks and side effects
- Written declaration of consent
- Thorough disinfection
- Topical anesthesia (optional for lidocaine variant)
During treatment:
- Mark treatment areas
- Choose the right Perfectha product
- Inject slowly and in a controlled manner
- Gentle massage for shaping
- Symmetry control
- Correct if necessary
After treatment:
- Cooling 10-15 minutes
- Aftercare instructions in writing
- Photo documentation
- Follow-up check after 2 weeks
Safety and complication management
Contraindications:
- Allergy to hyaluronic acid or components
- Active skin infections in the treatment area
- Autoimmune diseases (relative)
- Tendency to form keloids (relative)
- Pregnancy and breastfeeding (caution)
Emergency management of vascular occlusion:
- Immediately: Stop injection
- Hyaluronidase: Inject 150-300 IU directly
- Massage: Massage vigorously
- Heat: Warm compresses
- Aspirin: 300 mg for thrombosis prophylaxis
- Monitoring: Observe closely
- In case of deterioration: Clinic immediately
Hyaluronidase dissolution:
Perfectha can be dissolved for undesirable results:
- Dosage: 10-30 IU per 0.1 ml filler
- Effect: Within 24-48 hours
- Repeat: If necessary after 48 hours
Costs and profitability
Patient prices (average DACH region):
- Nasolabial folds: 300-500 € (1-2 ml Derm/Deep)
- Lip augmentation: 350-600 € (1-2 ml Derm/Deep)
- Tear trough: 350-550 € (1-2 ml FineLines/Derm)
- Cheek structure: 500-1,000 € (2-4 ml subskin)
- Fine lines: 250-400 € (1 ml FineLines)
Product usage:
- Nasolabial folds: 1-2 ml (Derm or Deep)
- Lips: 0.5-2 ml (Derm or Deep)
- Tear trough: 0.5-1 ml per side (FineLines or Derm)
- Cheeks: 2-4 ml total (subskin)
- Chin: 1-2 ml (subskin)
Storage and handling
Optimal storage conditions:
- Temperature: 2-25°C (do not freeze)
- Light: Protect from direct sunlight
- Packaging: In original packaging until use
- Shelf life: See expiry date (typically 2 years)
Preparation:
- Bring product to room temperature 30 minutes before use
- Visual inspection for discoloration or particles
- Sterile removal from packaging
- Choose a suitable needle or cannula
Frequently Asked Questions (FAQ)
What makes Perfectha different from other fillers?
The E-Brid technology ensures an optimal balance between viscosity and elasticity. Perfectha offers very high elasticity for natural facial expressions while maintaining good dimensional stability.
How long does Perfectha last?
Depending on the product: FineLines 6-9 months, Derm 9-12 months, Deep 12-15 months, Subskin 12-18 months. Individual factors influence durability.
Is Perfectha painful?
With lidocaine variant and topical anesthesia, the treatment is well tolerated. Most patients only feel light pressure.
Can Perfectha be dissolved?
Yes, Perfectha can be completely dissolved with hyaluronidase. This provides security in the event of undesirable results.
Which Perfectha for lips?
For contouring: Derm. For volume: Deep. For fine lines around the lips: FineLines.
How much does Perfectha cost compared to premium brands?
Perfectha is priced in the mid-range segment and offers excellent value for money with high quality.
Conclusion: Perfectha for natural results
With E-Brid technology, Perfectha offers an excellent alternative to premium brands:
Main advantages:
- E-Brid technology for optimal elasticity
- Natural results through high mobility
- Low tendency to swelling
- Reversible with hyaluronidase
- Excellent value for money
- Four variants for all indications
Ideal for:
- Practices that are looking for quality at a fair price
- Patients who want natural facial expressions
- All wrinkle and volume treatments
- Practitioners who value flexible product ranges
Perfectha products at FitTec
At FitTec you will find the complete Perfectha range from Sinclair Pharma:
- Perfectha FineLines Lidocaine 1 x 1 ml
- Perfectha Derm Lidocaine 1 x 1 ml
- Perfectha Deep Lidocaine 1 x 1 ml
- Perfectha Subskin Lidocaine 3 x 1 ml
All products are original, certified and intended for professional medical use. Fast delivery and expert advice included.
Note: This article is intended solely for the information of healthcare professionals. All treatments should only be performed by qualified and licensed physicians. As of: January 2026